HomeTaylor Rental ServicesProductsContact

Meyer Spreaders

Mini Jr.™

SMALL BY NAME, BIG BY PERFORMANCE
Meyer's Mini Jr. is the answer to life’s little challenges. It’s easy to use and ideal for jobs like walkways, driveways and small parking lots. Built to spread up to 400 lbs. of dry, free flowing #1 rock salt, the Mini Jr. allows you to handle several jobs with just one load.

For convenience, the Mini Jr. is equipped with in-cab, variable-speed controls that regulate a spread pattern that ranges from three to 30 feet. And attaching the polyurethane hopper is a breeze using a standard, 2-inch square receiver.

Direct Drive Motor
The heart of a tailgate spreader is its electric motor. The Mini Jr. utilizes a powerful 1/8 HP direct-drive motor. No inefficient, space-consuming, right-angle gearboxes found in this spreader! Its spinner runs directly off the motor drive shaft delivering positive, energy-efficient power to the operating system.

 

MORE POWER, GREATER RELIABILITY
A funny thing happens to equipment with moving parts in cold, icy weather. It slows down, breaks down, or in some way, lets you down. Take for instance stubborn chunks of fused rock salt or debris that jam the drive system of most tailgate spreaders. That’s one jam session that won’t happen with Meyer® Blaster™ spreaders because Blasters have the most powerful spreader motor available. The Blaster’s unique ½ horsepower, direct-drive motor is rated at up to 70 amps of surge power to grind through those annoying chunks of salt or sand. And the direct-drive system applies the torque directly to the auger.


Need To Do A Little Sand Blasting?
Your basic Blasters come in 350- and 750-pound capacities. But if you need to throw sand, or a blend of salt and sand, you need the “S” versions. The 350S and 750S models come ready to spread a 50/50 blend of dry, free-flowing, #1 rock salt and sand; or sand only. If you want to add sand-spreading capabilities to a standard 350 or 750, you can also purchase a Vibrator Kit that converts a basic Blaster into an “S” model.

 

LPV

GO LOW AND SPREAD QUIETLY!
When you’re out plowing or spreading, ever wished you could see better out of the rear window? Now you can with Meyer’s electric-powered LPV (Low Profile V-box) spreader. Designed for 1/2 ton to 1-ton pickup trucks, the LPV’s overall height is 25% less than typical pickup truck spreaders, so rearward visibility is significantly increased.

And because it’s a Meyer spreader, you know it’s reliable and has outstanding performance. The LPV has been field-tested to be the quietest and most efficient electric powered spreader available. It’s powered by a sealed, 12V electric motor and has fewer parts, which means less maintenance and less downtime.

Spread It Where You Want It
Getting the material in the right place the first time is critical. With Meyer’s two internal and four external baffle adjustment systems, you will place the material in the right place, every time. Whether you want to spread four feet to the left, four feet to the right, or spread a thirty foot pattern, you can easily adjust the spreading pattern to meet your unique demands. In addition, Meyer spreaders are engineered to handle virtually any material you can throw at it including salt, sand, and salt/sand mix.

When You're On A Roll, Stay On A Roll
High performance in virtually any condition is not optional, so Meyer includes many performance-enhancing components as STANDARD. Our no-tools-required top screen breaks-up large clumps of material which can cause damage to the drag chain and reduce performance. Meyer’s integrated chain shields prevent material from building up in the drag chain and slowing you down. Finally, we offer as standard, our inverted-V which helps prevent material from bridging and slowing down the conveyor.

The Choice Is Yours
Our LPV spreaders are available in the following configurations:

POLYHAWK™

LONG MAY YOU RUN.
The Polyhawk is designed to be your spreader not only for this season, but for many to come. Featuring an unprecedented ten-year warranty on the virtually indestructible polyethylene hopper, Meyer dares you to compare the features of the Polyhawk to any other poly hopper spreader on the market.

Spread It Where You Want It
Getting the material in the right place the first time is critical. With Meyer’s two internal and four external baffle adjustment systems, you will place the material in the right place, every time. Whether you want to spread four feet to the left, four feet to the right, or spread a thirty foot pattern, you can easily adjust the spreading pattern to meet your unique demands. In addition, Meyer spreaders are engineered to handle virtually any material you can throw at it including salt, sand, and salt/sand mix.

When You're On A Roll, Stay On A Roll
In snow and ice control, high performance in any condition is mandatory, so Meyer includes many performance-enhancing components as STANDARD. Our no-tools-required top screen breaks-up large clumps of material which can cause damage to the drag chain and reduce performance. In addition, we prevent material from building up in the drag chain and slowing you down by including bolt-in chain shields as standard equipment. Finally, we offer as standard, our inverted-V which helps prevent material from bridging and slowing down the conveyor.

Power Up, The Choice Is Yours
Our pickup truck spreaders are available in the following configurations: